Saftronics FP5/GP5 Series - Parts Required for Wiring

Chapter 3: Wiring
Firmware – S2011 and S3012
Revision: 1 (9/98) 17 © Saftronics, Inc.
3.2.6 Parts Required for Wiring
Select wires or Closed-Loop Connectors to be used for wiring from Tables 5, 6 and 7.
Table 5 200 V Class Wire Size
Wire Size
=
Circuit
Model
FP5/GP5
Terminal Symbol
Terminal
Screw
AWG mm
2
Wire Type
L1, L2, L3, (R, S, T) Ö, ¾ 1, ¾ 2, B1, B2, T1, T2, T3
(U, V, W)
23P7 M4 10 5.5
L1, L2, L3, (R, S, T) Ö, ¾ 1, ¾ 2, B1, B2, T1, T2, T3
(U, V, W)
8 8
25P5 M5
10-8 5.5 − 8
L1, L2, L3, (R, S, T) Ö, ¾ 1, ¾ 2, B1, B2, T1, T2, T3
(U, V, W)
8 8
27P5 M5
10-8
5.5 − 8
L1, L2, L3, (R, S, T) Ö, ¾ 1, ¾ 2, ¾ 3, T1, T2, T3 (U,
V, W)
4 22
2011 M6
8 8
L1, L2, L3, (R, S, T) Ö, ¾ 1, ¾ 2, ¾ 3, T1, T2, T3 (U,
V, W)
M8 3 30
2015
M6 8 8
L1,L2, L3, (R, S, T) L11, L21, L31, (R1, S1, T1), T1,
T2, (U, V, W)
3 30
2018 M8
6 14
L1,L2, L3, (R, S, T), L11, L21, L31, (R1, S1, T1), T1,
T2, T3 (U, V, W)
2 38
2022 M8
6 14
L1,L2, L3, (R, S, T), L11, L21, L31, T1, T2, T3, (U, V,
W)
M10 4/0 100
2030
M8 4 22
L1,L2, L3, (R, S, T), L11, L21, L31, T1, T2, T3, (U, V,
W)
M10 1/0 x 2P 60 5 2P
2037
M8 4 22
L1,L2, L3, (R, S, T), L11, L21, L31, T1, T2, T3, (U, V,
W)
M10 1/0 x 2P 60 5 2P
2045
M8 4 22
L1,L2, L3, (R, S, T), L11, L21, L31, T1, T2, T3, (U, V,
W)
M10 1/0 x 2P 60 5 2P
2055
M8 3 30
L1,L2, L3, (R, S, T), L11, L21, L31, T1, T2, T3, (U, V,
W)
M12 4/0 x 2P 100 5 2P
Main
2075
M8 1 50
Power cable:
600V vinyl
sheathed wire
or equivalent
S1, S2, S3, S4, S5, S6, SC,
FV, FI, FS, FC,
AM, AC, M1, M2, MA, MB, MC
 20-16
Stranded
0.5 − 1.25
Solid
0.5 − 1.25
Control
Common to
all models
G M3.5 20-14
0.5 − 2
Twisted
shielded wire
= Where size is determined using 75°C temperature-rated copper wire.
efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor