Need help?Do you have a question about the Saftronics GP5 Series and is the answer not in the manual?
Provides an overview of the FP5/GP5 series inverters, highlighting features and design.
Details the technical specifications for the FP5/GP5 inverter models, including electrical and environmental data.
Guides users through the initial checks after unpacking the inverter, including nameplate verification and parts identification.
Covers essential precautions and guidelines for safely and correctly mounting the FP5/GP5 inverter.
Provides dimensional data and heat loss information for both open chassis and NEMA 1 enclosure types.
Specifies required clearances around the inverter for effective cooling and proper installation.
Details precautions, inspection steps, and diagrams for wiring the FP5/GP5 inverter's main and control circuits.
Explains the procedures and components for wiring the main power circuit of the inverter.
Provides instructions and considerations for connecting the motor and other output wiring to the inverter.
Outlines the correct grounding procedures and requirements for the FP5/GP5 inverters.
Describes the purpose and function of each terminal on the FP5/GP5 inverter for both 230V and 460V classes.
Specifies the appropriate wire sizes, terminal screw types, and torque settings for connections.
Details the functions of control circuit terminals and provides wiring arrangements for various signals.
Lists critical safety precautions to be observed before and during inverter operation.
Guides users through the initial trial run of the inverter, including checks and basic operation procedures.
Explains the functions of the digital operator's display and keypad for accessing and controlling the inverter.
Describes the meaning of the LEDs on the digital operator and their relation to inverter status.
Details how to select between LOCAL and REMOTE operation modes using parameter n002.
Covers various operational features like Accel/Decel time, fault retry, carrier frequency, and current limit.
Explains the configuration and functionality of multi-function input and output signals, and analog inputs.
Lists and describes all programmable parameters (n001 to n116) for configuring the inverter's functions.
Details how to set up and initialize parameters, including password protection and factory default settings.
Explains the configuration and functionality of multi-function input and output signals, and analog inputs.
Highlights safety precautions specific to performing diagnostic and maintenance procedures on the inverter.
Provides guidelines for periodic inspection and routine maintenance to ensure reliable inverter operation.
Describes the inverter's alarm and fault displays, including explanations and corrective actions for malfunctions.
Lists common motor faults, their potential causes, and corrective actions to troubleshoot motor-related issues.
Illustrates wiring diagrams for connecting braking resistors and units to the FP5/GP5 inverter.
Details the information displayed on the digital operator's monitor for various inverter parameters and statuses.
Provides information regarding CE conformance, safety warnings, and operating guidelines for inverters.
Contains the EU manufacturer's declaration of conformity for the FP5/GP5 static inverter series.
General| Brand | Saftronics |
|---|---|
| Model | GP5 Series |
| Category | Inverter |
| Language | English |
To Next Page
