Why is the coffee from my Sage Duo-Temp Pro BES810 Coffee Maker too cold?
If the coffee from your Sage Coffee Maker is too cold, it might be because the cups were not preheated. Preheat your cups before brewing.
Why is my Sage Duo-Temp Pro BES810 making a loud and continuous pumping noise?
If your Sage Coffee Maker produces a loud and continuous pumping noise, ensure the water tank is filled. Also, make sure the water tank is securely in place by pushing it down completely until it locks.
How to fix no steam on my Sage Duo-Temp Pro BES810?
If your Sage Coffee Maker is not generating steam, first ensure the machine is plugged in, switched on at the power outlet, and the POWER button is pressed. Check that the water tank is filled. Make sure the Control Dial is in the ‘Steam’ position and that you use the ‘SELECT’ button to toggle to ‘Steam’, ensuring the ‘Steam’ LED is illuminated. The steam wand may be blocked, use the pin on the cleaning tool to clear the opening. If it remains blocked, remove the tip of the steam wand using the spanner in the middle of the cleaning tool.
General| Brand | Sage |
|---|---|
| Model | Duo-Temp Pro BES810 |
| Category | Coffee Maker |
| Language | English |
Steps to prepare the water filter before initial use.
Procedures for the first startup and machine flushing.
Instructions on how to fill the water tank correctly.
Guidance on choosing between single and dual wall filter baskets.
Steps for correctly dosing and tamping coffee grounds.
Detailed steps for brewing espresso, including timing and volume.
A guide correlating grind, dose, tamp, and shot time for optimal extraction.
How to steam and texture milk for beverages.
Solutions for when coffee fails to dispense from the machine.
Causes and fixes for rapid coffee dispensing.
To Next Page
