Sage II - Cable Wiring Notes; Terminal Cable, Televideo 925; Terminal Cable, Multiuser, Televideo 925; Intex Talker Cable

SAGE rr SERVTCE
I,IANUAL
[1.0]
ALIGNMENT DIAGNOSTIC
R.
. .Repeat
test
for
9
pagaea.
Runnlng
the test
for
many
passes
w111 take
awhlle.
A
quick
check
of
a
drlve can be
done by changlng
the repeat
nr:mber
to
1.
This
ls
normally not done unless
an attempt
to align
the
drlve
is
being
made.
O.
.
.(hrtput
data to :
PRINTER:
This
works
with
the
P
(print)
optlon
to a1low the
results
of
the
test to
be
printed
or written to
a
file. Type ln
the device
or
ftle
name.
TYping
Just
a
(cr)
will
restore the output
optlon
to
PRINTER:.
Example:
Type
rrotr
for the output option.
ttDRv4.DATA"
for
the
file name
trPrt
to write
the
file
tt6tr
to return
to the output option.
<CR>
a
return
restores output
to
PRINTER:
NOTE: The
printer
speed and
type
is
conflgured
using
SAGEUTIL.
See
the
SAGE owner's manual.
lI.
. .Wrlte thl-s screen
This
writes
the
menu
screen
(output)
optlon. It
is
used
was run ofl,
to the
f lle
or devl-ce set by the 0
to save
the
parameters
that the test
K...Keep
regults.
If
no
test
has
been run the message
ttNo
data
yet."
will dlsplay.
Type any key
to
restore
the menu. OtherwLse,
the
K
optlon
asks
that the data diskette be
inserted ln
drive
ll4z,
It looks
for
f lle
ttA.DATA.text'r
and reads
lt lf found or
creates
it if not.
It
then
asks
for
informaElon
about
the
model
and type of
disk tested. The
test
results are added to the
file
A.DATA so
that
on-golng
records
can
be kept
of disk
problems.
The
program
DATAPAGE
can
be used
to
print
the flle with
one set
of results
per page.
B.
. .EXIT
The
program
exlts
to the test menu.
43