4.3.3 Clock
You can choose whether to set the clock manually or synchronize
automatically with your IP Radio . The default method is Auto snyc (NTP).
Please confirm that you have the correct time zone set (refer to Time Zone
section for settings).
Set Manually:
(1) Rotate the Wheel to choose Hours and Minutes on the Set Time page.
(2) Press the Wheel to bring up the Set Date page.
(3) Rotate the Wheel to choose the date.
4.3.4 Radio Scan
Rotate the Wheel to choose whether to scan the radio stations manually or
automatically while you are using the Internet Radio or FM Radio functions.
4.3.5 Reset To Default
This section allows you to return all your settings to default settings. If you
choose Yes, you will lose all the personalized settings you have in Audio Pro-
file, Time, and Advance setup.
To Next Page
Loading...
