4.5.3 Edit Config
This section allows you to adjust your network settings manually.
Rotate the Wheel to select Edit config.
You will be asked to choose whether to enable auto DHCP or not. DHCP
allows the network connection to establish itself automatically each time you
use your IP Radio.
When you choose YES, the device will start to find a gateway automatically.
When you choose NO, you will need to setup the network according to your
needs. Contact your network service provider for the IP address, network
mask, gateway address and DNS server information.
(1) Rotate the Wheel to select the numbers, and then press the Wheel to go
through the settings.
→
→
→
To Next Page
Loading...
Need help?
General