Sailmon MAX - Extra Functionalities; E4 Slave Mode; MAX Slave Mode

MAX QUICK START GUIDE 28
6. EXTRA
FUNCTIONALITIES
E4 SLAVE MODE
Add a Sailmon E4 Processor to add all data to your MAX
1. Take your MAX
a. Go to Menu > System > Advanced > enable E4 Slave Mode
b. MAX will restart in repeater mode (this takes some time)
c. Wait until the MAX shows ‘Connecting to E4’ (make sure WiFi is on)
2. Take your Sailmon E4 processor
a. Power on
3. Your MAX will automatically detect your nearby
Sailmon E4 processor
You can configure all data to customized screens in the Page Builder
in MAX.
MAX SLAVE MODE
With the Slave Mode, you can duplicate your MAX screen
to another MAX.
1. Take your second MAX
a. Go to Menu > System > Advanced > enable MAX Slave Mode.
b. MAX will restart in repeater mode (this takes some time)
c. Once done, please go to Menu > Find Master MAX.
2. Take your first (or so-called ‘Master’) MAX:
a. Power on
b. Allow remote discovery (Menu > Connections > Allow Remote MAX)
3. Take your second MAX
a. Press scan
b. Select your desired MAX