MAX QUICK START GUIDE 31
8. CHARGING MAX
Nobody likes low battery levels, so make sure to charge the battery
before your next use. Plug the Sailmon charger into the power plug and
place MAX on top of the Sailmon logo until the blue light slowly flashes.
The MAX will show if it’s removed from the charger.
IS YOUR MAX NOT CHARGING ANYMORE?
PLEASE FOLLOW THE CHECKLIST BELOW!
1. Use the original MAX charging set (charging pad, cable and USB
charger/power adapter). Are you using another USB charger/power
adapter? Make sure it has the same power output: 5V 2A.
2. Use a standard (wall) socket. Do not use other devices
(e.g., computers and tablets). They will not give enough power
output to charge MAX.
3. Put the MAX precisely on the centre of the charging
pad, until the pad lights blue.
- Does your MAX turn on with ‘battery charging’?
Leave it on the pad for 24 hours.
- Does your MAX not turn on?
Please submit a support ticket here.
To Next Page
Loading...