MAX QUICK START GUIDE 29
NON-GPS MODE
In MAX you can turn o GPS. This function is ideal for classes in which
GPS is not allowed.
1. Go to Menu > System > Sensors > enable/disable No GPS mode
2. MAX will show no GPS signal in the bottom bar.
Compass, heel and pitch and Start Functionality will remain.
3. Your trip won’t be uploaded to the Sailmon App
EVENTS
With events you’re able to make your MAX and the Sailmon App smarter.
CHAPTER EVENTS (MENU > EVENT)
GENERAL EVENT
Log a moment during your trip for easy retrieval in the Sailmon App.
RACE FINISH
Log the race finish during your trip for easy retrieval in the Sailmon App.
SET COURSE AXIS
Fill in the course axis by entering a value in degrees between 0 and 359.
For example, the top wind mark or the course the start vessel is showing.
SET WIND SPEED
Fill in the wind speed in knots by entering a value in knots between 0 and
40. This function is relevant if you don’t have a connected wind sensor
but still want to receive wind data.
To Next Page
Loading...