14
Installation
C4900/01
3c Handset (loc_1): Handset loc_2: VHF display.
Hook on.
Other control units: OCC display.
3d Handset (loc_3): Handset loc_2: VHF display.
Hook off.
Other control units: OCC display.
3e Handset (loc_3): Handset loc_2: VHF display.
Hook on.
Other control units: OCC display.
3f Handset (loc_2): All control units: VHF display (system idle).
Hook on.
All on hook.
If the different control units do not act as described, it is possible that some of the units are assigned the same location
number; if so, check the location number setup in each unit.
16
0 08 01
MEM VOL SQ
oCC
2 “NAME”
16
0 08 01
MEM VOL SQ
oCC
2 “NAME”
16
0 08 01
MEM VOL SQ
oCC
2 “NAME”
16
0 08 01
MEM VOL SQ
0010