Sailor System 5000 MF/HF - Select a Channel from the Station Table

11
Basic
0735
3.4.4 Replace a channel
Select the desired RX frequency, TX frequency and mode setting.
Press Ch and key in a channel
number between 1 and 199.
Press the REPLACE softkey to store the
channel.
softkey, deletes the
previous entry
REPLACE softkey, to convert to the
new RX and TX frequencies.
CANCEL softkey, selects the previous display
3.5 Select a channel from the station table
Press the STATION softkey in the Telephony display.
Station names are shown
Steps to the previous/next station
in alphabetic order
CANCEL softkey, selects the previous display
Selects the station
Steps to the previous/next station
CANCEL softkey, selects the previous display
Selects the station and
returns to telephony display
Channels allocated the selected station is
shown
The radio is ready for use on the selected channel.