32
Detail
0725
6 Telex operation
For the MF/HF products a Telex option is available. The Telex option is enabled by entering
of a pin-code (key) into the MF/HF transceiver. This pin code is uniquely matched to the
serial number of the MF/HF transceiver, i.e. one specific pin code will enable the telex option
in one specific MF/HF transceiver only.
Once in possession of the required pin code the telex option is enabled from the menu point
Telex setup in the Setup menu. The 10-digit pin code is entered from the transceiver keypad.
When the pin code has been entered and the telex option enabled, the telex feature remains
permanently available for selection.
6.1 Telex setup
Press the Menu button and
select 5. SETUP
select 5. TELEX SETUP
Press CHANGE to enable
Returns to previous menu
To Next Page
Loading...
