Sailor System 5000 MF/HF - Page 23

15
Detail
0735
Set answer back mode
AUTO ACKNOWLEDGEMENT = ON:
Transmission of acknowledgement is initiated automatically when a direct call, polling or
position request call is received.
AUTO ACKNOWLEDGEMENT = OFF:
Manuel acknowledgement only. Direct calls initiated by the ship can be carried through;
direct calls from coast stations cannot (factory default).
Note: The purpose is to enable the user to prevent automatic transmissions, e.g. when the
ship is in port.
Set auto position transmit
AUTO POSITION RESPONSE = ON:
Position information is included in direct calls and position request acknowledgements
AUTO POSITION RESPONSE = OFF:
Position information is excluded in direct calls and position request acknowledgements
Set auto channel switch
AUTO CHANNEL SWITCH = ON:
??
AUTO CHANNEL SWITCH = OFF:
??
Set telecommand
TELECOMMAND AND MEDICAL = ON:
Is only available by default after changing relevant parameters in the setup menu
TELECOMMAND AND MEDICAL = OFF:
Is only available by default after changing relevant parameters in the setup menu
TELEC. SHIP AND AIRCRAFT = ON:
Is only available by default after changing relevant parameters in the setup menu
TELEC. SHIP AND AIRCRAFT = OFF:
Is only available by default after changing relevant parameters in the setup menu