4.2.2 Mounting Method
Figure 4.3
Mounting method
① The equipment employs natural convection cooling, and it can be installed indoor or outdoor.
② Mount vertically. Never install the battery tilted forwards, sideways, horizontally or upside down.
③ When mounting the battery, please consider the solidity of wall for battery, including accessories, make
sure the wall has enough strength to hold the screws and bear the weight of products. Please ensure the
mounting bracket mounted tightly.
Installation Environment Requirements
• The installation environment must be free of inflammable or explosive materials.
• Install the battery away from heat source.
• Do not install the battery at a place where the temperature changes extremely.
• Keep the battery away from children.
Note: When installing outdoors, the height of the battery from the ground should be considered to prevent the
battery from soaking in water. The specific height is determined by the site environment.
4.3 Mounting Procedure
4.3.1 Installation Tools
Installation tools include but are not limited to the following recommended ones. Please use other auxiliary
tools on site if necessary.
To Next Page
Loading...
Need help?
General
