SAJ HS2 Series - Local Connection Setup

HS2/AS2 Series
59
60
6.4.2 Local Connection
Step 1: Open eSAJ APP and click on the dot icon on the top right corner
Step 2: Select “Local Connection”
Step 3: Enter password “123456”
Step 4: Click on “Bluetooth” and activate the Bluetooth function on your phone, then click on “Next”
Step 5: Choose your inverter according to your inverter SN’s tail numbers
Step 6: Click on the inverter to enter inverter setting
Step 7: Select the corresponding country and grid code for