To Next PageTo Next Page
Need help?Do you have a question about the SAJ CHS2 Series and is the answer not in the manual?
General| Category | Storage |
|---|---|
| Communication | CAN/RS485/Ethernet |
| Operating Temperature Range (°C) | -25 ~ +60 |
| Operating Temperature (°C) | -25 ~ +60 |
| Non-Operating Temperature (°C) | -40 to +70 |
Defines the range of SAJ products covered by this user manual.
Provides critical warnings and cautionary information for safe operation.
Identifies qualified electricians as the intended users for installation and repair.
Detailed safety instructions to be followed before any work is performed.
Defines various symbols used in the manual for safety and warnings.
Guidelines for safe operation and use of the battery.
Recommended actions in case of battery electrolyte leakage or fire.
Details the C&I energy storage system's suitability for residential and commercial use.
Explains the naming convention and specifications for different product models.
Procedures for checking the package contents and inspecting for transit damage.
Lists all components included in the inverter package.
Specifies requirements for installation location and necessary surrounding space.
Details the correct methods for physically mounting the inverter.
Lists the tools recommended for the installation process.
Detailed steps for ground mounting, including drilling and securing.
Instructions for connecting the additional grounding cable.
Steps to prepare the inverter for electrical wiring operations.
Details on connecting communication cables and ports.
Configuration for setting the export limit of electricity to the grid.
Instructions for connecting dry contact signals for control.
Information on RCR signal control ports for grid dispatching.
How to connect the 12V power output for external modules.
Connecting the dry contact for emergency stop functionality.
Defines the pinout for RJ45 communication ports.
Procedure for connecting the AC power cables.
Information on the inverter's earth fault alarm monitoring.
Guidance on installing external AC breakers and RCDs.
Instructions for connecting the photovoltaic array to the inverter.
Detailed steps for assembling PV connectors.
Procedure for installing communication modules like 4G/Wi-Fi.
Instructions for reinstalling decorative panels.
Illustrates the overall system connection for Australia and New Zealand.
Diagram showing system connection for standard grid systems.
Explanation of the inverter's arc-fault circuit interrupter (AFCI) function.
Step-by-step guide for starting up and shutting down the system.
Detailed steps for powering on the energy storage system.
Detailed steps for powering off the energy storage system.
Overview of the inverter's interface, including LED indicators and status.
Instructions for downloading and installing the mobile application.
Guide to logging into the app and performing initial system setup.
How to view device information, running status, and events.
Connecting the inverter for remote monitoring via web portal or app.
Details on selecting and understanding different operating modes.
Step-by-step guide for choosing the desired working mode.
Explanation of Self-consumption, Back-up, and Time-of-use modes.
Methods to control and limit electricity export to the grid.
Using the mobile app to configure export limitations.
Steps for performing self-tests required by Italian standards.
Configuration for reactive power control according to Australian regulations.
Setting up fixed power factor and fixed reactive power modes.
Configuring Volt-Watt and Volt-Var response modes as per AS/NZS 4777.2.
Guidelines for safely transporting lithium batteries and the product.
Instructions for storing the product in optimal environmental conditions.
List of fault codes and their corresponding information for diagnosis.
Information regarding warranty conditions and terms.
