SAJ R5-3.6K-S2 - Chapter 5 Electrical Connection; Hot-line Job Safety

R5 Series
- 19 -
Fig. 4.8 Fasten the inverter and hanging panel with screws
4.4.5 Install Anti-theft Lock
As shown in figure 4.9, anti-theft lock could be added to the inverter and hanging
panel. Diameter of the lock hole is φ6.0mm and anti-theft lock with a φ5.0mm
diameter of lock hook shall be recommended.
Users shall prepare anti-theft lock by themselves.
Figure 4.9 Install anti-theft lock