Sako SKI780 - 5.3 Description of Keys on the Operation Panel

5.3 Description of Keys on the Operation Panel
Key Name Function
PROG Programming | Enter or exit Level | menu.
Fi Function switch selection. It can be defined as a
Multifunction . .
M-FUN command source, or as a fast direction switch,
Selection
according to P7-01.
A Increment | Increase data or function code.
Vv Decrement | Decrease data or function code.
Select the displayed parameters in turn in the stop
SHIFT Shift or running state, and select the digit to be modified
when modifying parameters.
ENTER Confirm Enter the menu interfaces level by level, and confirm
the parameter setting.
RUN Riis Start the AC drive in the operation panel control
mode.
Stop the AC drive when it 1s in the running state and
STOP Stop perform the reset operation when it Is in the fault
state. The functions of this key are restricted in P7-
02.
www sakohzcom/ 12