Sako SKI780 - Page 57

6.1 Brief introduction of function code
PC Multi-Reference and Simple PLC Function
Function Parameter '
Code Nanna Setting Range Default | Property
pc-42_ | Running time ofsimple PLC | 9 9.(n) ~ 6553.5s(h) | 0.0s(h) | 4x
reference 12
Acceleration/deceleration time
eee of simple PLC reference 12 — f *
pc.ag | RunningtimeofsimplePLC | 9 <n) ~ 6553.5s(h) | 0.0s(h) | ox
reference 13
Acceleration/deceleration time
la of simple PLC reference 13 o~3 0 *
pc.ag | Runningtimeofsimple PLC | 9 <n) ~ 6553.5s(h) | 0.0s(h) | ox
reference 14
Acceleration/deceleration time
PCat, of simple PLC reference 14 ad 7 *
pc-4g | Runningtimeofsimple PLC | 9 4.(4) ~6553.5s(h) | 0.0s(h) | +x
reference 15
Acceleration/deceleration time
BEAD of simple PLC reference 15 o~8 Y
PC-50 | Time unit of simple PLC running | 0: second = 1: hour 0
0: Set by PC-00
1: All
2: Al2
3: Panel
potentiometer
PC-51 | Reference 0 source 4: HDI pulse setting 0 Ww
5: PID
6: Set by preset
frequency (PO- 08),
modified via UP/
DOWN
S51 \wwwsakohzcom