Sako SKI780 - Page 59

6.1 Brief introduction of function code
PD Communication Parameters
Function Parameter
Code Narnia Setting Range Default | Property
0: No check, data format <8,N,2>
1: Even parity check, data format
MODBUS data | SS -1>
PD-01 2: Odd Parity check, data format 0 x
format
<8,0,1>
3: No check, data format <8,N,1>
Valid for Modbus
0: Broadcast address
PD-02 | Local address 1~247 1 Ww
pp.03 | MODBUS 0 ~ 20ms 2 t
response delay
Communication | 0.0: invalid
PD-04 | timeout 0.1 ~ 60.0s oe *
Unit's digit: Modbus protocol
0: Non-standard Modbus protocol
Modbus pratecal 1: Standard Modbus protocol
P Ten's digit: PROFIBUS-DP data
selection and
PD-05 format 30 w
PROFIBUS-DP
data fi t 0: PPO1 format
oraeane 1: PPO2 format
2: PPO3 format
3: PPOS format
Communication
0. 0.01A
PD-06 | reading current LOJA 0 w
resolution
53 \wwwsakohzcom