Sako V780 - Page 29

23
P4 Input Terminals
Function
Code
Parameter
Name
Setting Range Default Property
P4-04
DI5 terminal
function
selection
27: Length count input
28: Length reset
29: Torque control prohibited
30: Pulse input (enabled only for DI5)
31: Reserved
32: Immediate DC braking
33: Normally closed (NC) input of
external fault
34: Frequency modi󽗉cation enable
35: Reverse PID action direction
36: External STOP terminal 1
37: Command source switchover
terminal 2
38: PID integral pause
39: Switchover between main
frequency source X and preset
frequency
40: Switchover between auxiliary
frequency source Y and preset
frequency
41: Reserved
42: Reserved
43: PID parameter switchover
44: User-de󽗉ned fault 1
45: User-de󽗉ned fault 2
46: Speed control/Torque control
switchover
47: Emergency stop
48: External STOP terminal 2
49: Deceleration DC braking
50: Clear the current running time
51-59: Reserved
12 ★
P4-10 DI 󽗉lter time 0.000s ～ 1.000s 0.01s ☆
6.1 Brief introduction of function code