Sako V780 - Page 41

35
P8 Auxiliary Functions
Function
Code
Parameter
Name
Setting Range Default Property
P8-00 JOG running frequency
0.00Hz ～ maximum
frequency
2.00Hz ☆
P8-01 JOG acceleration time 0.0s ～ 6500.0s 20.0s ☆
P8-02 JOG deceleration time 0.0s ～ 6500.0s 20.0s ☆
P8-03 Acceleration time 2 0.0s ～ 6500.0s
Model
dependent
☆
P8-04 Deceleration time 2 0.0s ～ 6500.0s
Model
dependent
☆
P8-05 Acceleration time 3 0.0s ～ 6500.0s
Model
dependent
☆
P8-06 Deceleration time 3 0.0s ～ 6500.0s
Model
dependent
☆
P8-07 Acceleration time 4 0.0s ～ 6500.0s
Model
dependent
☆
P8-08 Deceleration time 4 0.0s ～ 6500.0s
Model
dependent
☆
P8-09 Jump frequency 1
0.00Hz ～ maximum
frequency
0.00Hz ☆
P8-10 Jump frequency 2
0.00Hz ～ maximum
frequency
0.00Hz ☆
P8-11
Frequency jump
amplitude
0.00Hz ～ maximum
frequency
0.01Hz ☆
P8-12
Forward/Reverse
rotation dead-zone time
0.0s ～ 3000.0s 0.0s ☆
P8-13 Reverse control 0: Enabled 1: Disabled 0 ☆
6.1 Brief introduction of function code