Salda Ptouch - Heating season settings

13
EN
Number Function
Current setting indication.
I1
2
Number Function
Heating season mode:
By 3 days outside temperature average: heating season is selected
if average outside temperature exceeds the threshold;
By date: heating season starts and ends at specied days;
Heating: heating season is always active;
Cooling: heating season is never active;
Temperature threshold. Lower 3-day average of outside tempera-
ture will activate select heating season. Higher 3-day average of
outside temperature will cancel heating season.
Range: [0-30 °C]
F1
F2
F5
F1
F2
2.10Heatingseasonsettings
I1