TUTORIAL: Setting the Clock
Press the Clock Button
1
The Clock screen icon is
visible when the clock is in
Clock Set mode.
The current time is displayed
in the large digits in the
center of the display.
Adjust the Time
2
Hold down the +
button until the large
digits read 2:34 pm.
Continuing to hold down the +
button will accelerate the
addition of minutes and hours.
Use the – button to
subtract time if you
go past 2:34 pm.
OPTIONAL: Select 12- or 24-hour Format
If a 24-hour time display is
desired, use the
<< or >>
button
to
toggle between 12- and
24-hour time formats.
Changing this setting will
affect all areas of time display
within the clock such as Clock
time and Alarm time.
Save Changes
3
Press the Clock button or
green Play/Pause button
to save your changes.
After a few minutes of inactivity, the clock will automatically
exit the Clock setting mode and return to the clock display.
TG-EC-100-1.1
Discard Changes
Press the red Stop
button to discard any
changes that have been
made to the Clock.
Set the Clock to 2:34 pm.
Optional: Set the clock to 14:34.
Task:
To Next Page
Loading...