Salus EP210 User Manual

Fix the backplate to the wall. Align the front housing
at the top edge.
Fit the front housing. Press lightly.
Wall mounting
Jumper settings
EP210 Switching Bridges
Switch Feature Setting Default
System Fully pumped
system(P*)or gravity-
fed hot water
system(G*)
P G Fully pumped and
controlled system
Program 5-2 days program or
24h program
5-2 24H 5-2 days program
Memory Backup Disable/enable the
internal backup
battery
OFF ON Internal backup
battery disabled
Note: Changes to the jumper setting should only be made by the engineer carrying out the installation or another
qualified person. The installer should select the jumper positions required if changes need to be made to the factory
default settings. These jumpers are found on the rear of the controller.
The jumpers are found on the rear of your controller and can be used to change the
settings for the: program type, system type (fully pumped and controlled or gravity-
fed) and internal backup memory battery. If you want to change the position of the
jumpers, please note that you will need to reset your device.
06 EP210 Installation Manual

Salus EP210 Specifications

General

Brand	Salus
Model	EP210
Category	Controller
Language	English