Salus EP210 - Functions; Temporary Override; Boost Override (+1 Hr override)

Functions
Temporary Override
Boost Override (+1Hr override)
Boost Override (+1Hr override) is available in ONCE/AUTO/OFF modes. Boost mode can be activated even in
ADV mode. When boost mode is activated , ADV is canceled. Press +1Hr at current mode to activate the Boost
Override (+1Hr override) setting mode. Boost mode increases the time of the active program by 1-9 hours.
The new setting hour “+x” (x=last boost hour+1 hour) is displayed. Subsequent press of +1Hr will increase
the duration by 1 hour. Maximum duration is 9 hours. If the number rolls back to blank, this will disable
the Boost Override.
Press +1Hr to enter
Boost override.
The number of boost hours
will be displayed.
To exit boost override, press
mode button until number
+x disappears.
MODE
MODE
+Hr
+Hr
SELECT SET
<
<
Boost Override (+1Hr override) for Heating
MODE
MODE
+Hr
+Hr
SELECT SET
<
<
+1
MODE
MODE
+Hr
+Hr
SELECT SET
<
<
Press +1Hr to enter
Boost override.
The number of boost hours
will be displayed.
To exit boost override, press
mode button until number
+x disappears.
MODE
MODE
+Hr
+Hr
SELECT SET
<
<
MODE
MODE
+Hr
+Hr
SELECT SET
<
<
MODE
MODE
+Hr
+Hr
SELECT SET
<
<
Boost Override (+1Hr override) for Hot Water
+1
Boost Override (+1Hr override) can be available for CH and HW at the same time.
18 EP210 Installation Manual