Salus RT310i Installation Manual

Frost Protection
Press FROST button to activate Frost Protection.
The Setpoint temperature is automatically set to frost setpoint to prevent pipes from frosting. If the room
temperature is lower than the frost setpoint, frost protection will be enabled.
Press FROST button again to de-activate Frost Protection.
Via App
Tap menu icon
Go to settings
Select temperature
format
Select clock format
Frost Protection ON Frost Protection OFF
Frost Protection Setpoint
Tap menu icon
Go to Frost Protection
Adjust temperature
Default 5⁰C
Tap Save
You can adjust the Frost Protection setpoint using the App. The setpoint range is between 5-9 ⁰C
TESTING/PAIRINGTESTING/PAIRING
Actual room temperature Actual room temperature
Frost Mode activated
TESTING/PAIRINGTESTING/PAIRING
Frost Mode deactivated
Frost Protection ON Frost Protection OFF
1 1
2
1
2 3 4
2
16 RT310i Installation Manual

Salus RT310i Specifications

General

Type	Programmable Thermostat
Connectivity	Wi-Fi
Power Source	Battery
Temperature Range	5°C to 35°C
Power Supply	2 x AA batteries
Display	LCD
Control	Remote
Mounting	Wall-mounted
Battery Type	Alkaline
Control Mode	Manual, Programmable
App Support	Yes (Salus Smart Home App)
Programming	7-day programming
Communication Protocol	RF 868 MHz
Range	30 meters
Weight	150g