Salus RT310i Installation Manual

Before inserting the batteries, please make a note of your SRT number and register your device on the App.
RT310i thermostat
Connecting the iTG310 Gateway
S R T
SRT00000000 - 00
Plug in your gateway and attach the Ethernet cable and plug in into your router. The Led on the gateway will
flash red 3 times, then it should be steady green.
Gateway is ready
for pairing
Test Pairing Function
ON
AUTO
OFF
MANUAL
TEST/PAIRING
TEST/PAIRING
ON
AUTO
OFF
MANUAL
TEST/PAIRING TEST/PAIRING
Press the button once to test the connection between the thermostat and the receiver. If the devices are paired
the ON and AUTO LEDs will both flash. You can wait 9 minutes for the process to end or can press the button
again to stop.
1 2
RT310i Installation Manual 07

Salus RT310i Specifications

General

Type	Programmable Thermostat
Connectivity	Wi-Fi
Power Source	Battery
Temperature Range	5°C to 35°C
Power Supply	2 x AA batteries
Display	LCD
Control	Remote
Mounting	Wall-mounted
Battery Type	Alkaline
Control Mode	Manual, Programmable
App Support	Yes (Salus Smart Home App)
Programming	7-day programming
Communication Protocol	RF 868 MHz
Range	30 meters
Weight	150g