RT500BC INSTRUCTION MANUAL
8
CHANGING THE BATTERIES ON THE RT500
1. Open the front flap on the right hand side of the unit ,
this reveals the SET & SELECT buttons
2. On the bottom right hand side pull the small flap down
which will reveal the batteries as shown above.
3. Remove the old batteries
4. Now insert the new batteries, insert bottom battery with
the“+” end first followed by the top battery “ – “first .
Note:
When changing the batteries the RT500 will save your settings for 10
sec, after 10 seconds your settings will be lost
Salus RT500BC Boiler Control 026_89 21/01/2012 18:18 Page 8
To Next Page
Loading...
Need help?
General
