Use the Touch Ring to enter the date in exactly the same way as for the holiday start date.
By default, the HOLIDAY mode start and end dates are set to the current date.
Make sure that the end date is after the start date – if not, the HOLIDAY mode will be disabled.
The nal setting to be entered is the protection temperature
you want set while HOLIDAY mode is active.
Use the Touch Ring to set the preferred temperature and conrm
the choice using the OK button. Once the temperature setting
is conrmed, the HOLIDAY mode will be activated. While in this
mode the HOLIDAY mode indicator will be shown on the
display, but there will not be any MANUAL or AUTO indication.
ST620 INSTRUCTION MANUAL14
To Next Page
Loading...
Need help?
General
