ST620 INSTRUCTION MANUAL16
FROST MENU
Entering the FROST menu allows you to turn the frost protection mode of the ST620 on or off. The
FROST mode temperature is preset at 5 ºC; this temperature is factory set and cannot be adjusted.
The FROST mode indicator will be displayed in all the FROST menu screens.
On entering the menu, use the Touch Ring to scroll to the preferred option (OFF or ON), and conrm
the choice using the OK button. Use the Arrow key to return to the Menu Option display.
If the ST620 is operating in FROST mode the LCD will not indicate MANUAL or AUTO, but will display
both the room temperature and also the FROST mode indicator.
To turn off FROST mode, select the FROST menu and then by using the Touch Ring scroll to the OFF
setting. Press the OK key to conrm the setting.
To Next Page
Loading...
