Notices
Please read these instructions carefully before installing and using the Low
Voltage Fan Coil Thermostat.
• Follow all local and electricity supplier regulations regarding the installation or
replacement of a thermostat. An authorized, qualified installer may be required.
• Do not connect any of the terminals to a 120/240 VAC supply. The Low
Voltage Fan Coil Thermostat uses a 24 VAC power source.
• Do not cover any of the vents on the thermostat.
• Do not place the unit in a bathroom or area of excessive moisture.
• Do not allow the unit to get wet. This device serves as a temperature control
system only in dry, closed living and office spaces.
• Do not use solvents or aggressive cleaning agents. A dry, soft cloth is
recommended.
The manufacturer does not accept responsibility for any damage caused by not
following these instructions.
To Next Page
Loading...
