20 • SPS-300 Series Program Information SPS-300 SmartECR Supplement v1.11
Print Option Programming
As shown below, page 16 of the print options differs from the standard SPS-300 Series application. Read
each option carefully to determine if changes are necessary.
Programming a Print Option:
1. At the PGM control lock position menu, press 4 for PRINT OPTION Programming. The
PRINT OPTION P1 screen displays:
2. Use the PAGE UP and/or PAGE DOWN keys to view the appropriate option page.
3. Press ENTER (cash key) to advance to the desired option.
4. Make selection changes; press ENTER after making a change. If you don’t press enter, the
change will not be saved.
PRINT OPTION P16
NOT PRINT WHEN POLLING REPORT N
PRINT WHEN PROGRAM UP/DOWN N
ADJUSTABLE CUT (0-70) 40
COPY OF mBox RECPT.(0-99) 0
PRINT WHOLE CARD NO. N
PRINT EXP. DATE N
PRINT LAST LINE OF EJ 0
Print Option Definitions
SmartECR related print option definition.
COPY OF mBOX RECPT 0-99 Enter the number of copies of the mBox EFT
receipts.
PRT WHOLE CARD NO. Y or N If N, only the last four digits of the credit/debit
card will print.
PRT EXP. DATE Y or N If N, the credit card expiration date will not print
on the mBox EFT receipt.
To Next Page
Loading...
