Operator’s manual
Front disc mower
KDF 390
- 9 -
WARNING!
Securing both the danger area and activity performed shall lie under the
responsibility of the person in charge of the mower transportation.
Fig. 5. Location of centre of gravity
Tab. 4. Location of centre of gravity
Dimension [mm]
KDF 390
A 1985
B 1200
C 920
4.5. Operating parts
Prior to operating the mower check the knife, knife mountings and the knife holder condition.
Worn or damaged knives, knife mountings or knife holders should be replaced immediately
with new ones.
WARNING!
During replacement of working parts, it should be used personal protective
gloves.
4.6. PTO shaft
Before operating learn provisions found in bar manufacturer's manual placed on the shaft.
Use only PTO shafts recommended by the mower's manufacturer.
In order to operate safely use only fully technically fit, undamaged PTO shafts. Damaged PTO
shaft shall be repaired or replaced with new one.
Before any operation make sure whether PTO rpm have proper rotational direction.
4.7. Tarpaulin guards
Due to their storing, SaMASZ manufactured mowers feature standard tarpaulin guards (1)
for self-mounting. In order to mount the guard properly put it on a mower and secure with catches
(2) and with front guard (3) Fig. 6. Examine condition of guards and its mounting on regular basis.
B
A
C
To Next Page
Loading...
Need help?
General
