When the risk of exposure to noise cannot be avoided or eliminated by any
protective means or organization of work, the employer (farmer) must:
1) provide the operator with individual means of noise protection if the noise level
in work place exceeds 80 dB.
2) provide the operator with individual means of noise protection and supervise
the correctness of its usage, if the noise level in work place reaches or exceeds
85 dB.
4.9. Safety decals and their meaning
Safety labels are critical to safe use of this mower. They must be read, understood and followed.
Also, be sure that:
❑ All warning decals are clean and legible,
❑ All lost or damaged decals are replaced by ordering new decals from your dealer or supplier,
❑ All persons using this mower have read the section of this manual explaining the meanings of these
labels,
❑ All spare part used for repair of the mower should have all safety labels provided by the
manufacturer.
N-01
Be extremely careful when
PTO shaft is rotating
N-02
Remark: cutting knives!
Do not get near to the
operating mower
N-03
Prior to operation
commencement read the
operator's manual
carefully
N-04
Prior to approaching any
maintenance or repair works,
turn the machine off
N-05
Remark: belt gear, keep
particular attention
N-06
Remark: pulling-in parts
N-07
Operating the mower is
forbidden with presence of
any unauthorized personnel
within the danger area
of 50 m / 170 ft
To Next Page
Loading...
Need help?
General
