Fig. 3. Shaft lubrication instructions. Shaft connection
PTO shafts of other brands with equivalent technical parameters may be used on the SaMASZ
permission.
4. SAFETY PRECAUTIONS
The following precautions are for your safety. They must be read carefully and
followed by every person who operates or maintains the machine. Failure to follow these safety
precautions could result in serious injury or death to the operator, maintenance person or bystanders
and property damage to the machine and surrounding property.
Safety Signal Words
This manual and the safety labels attached to this equipment utilize signal words that signify safety
hazards with different levels of severity. Below are the words used and the definitions for these
words:
❑ DANGER indicates a hazardous situation which, if not avoided, will result in death or
serious injury
❑ WARNING indicates a hazardous situation which, if not avoided, could result in death
or serious injury
❑ CAUTION indicates a hazardous situation which, if not avoided, could result in minor
or moderate injury
❑ NOTICE is used to address practices not related to physical injury.
4.1. Safety rules and regulations
The following descriptions are for your safety: They must therefore be read
carefully and applied every time you use the machine.
❑ The machine has been designed for use by one single operator.
❑ When using, servicing, repairing, moving or storing the machine, the operator must wear safety
footwear, safety gloves plus ear protection and dusk mask if necessary.
To Next Page
Loading...
Need help?
General
