SaMASZ SAMBA 280 User Manual

32
SAMBA
REAR DISC MOWER
OPERATOR’S MANUAL
Fig. 20. Rear guard lifted up for replacement of cutting knives
Fig. 21. Quick replacement of cutting knives
Fig. 22. Knife mounting torqueing
NOTICE:
Before you change the knife check disc turns (Fig. 23).
NOTICE:
Due to high discs rpm speed, change knife holders in sets of the same weight.
Improperly changed knife holders will damage disc bearings.
NOTICE:
Different mounting of the knives will block the mower. When mounting pay particular
attention to loose rotation of the knife on the knife mounting pin.
130 Nm

SaMASZ SAMBA 280 Specifications

General

Brand	SaMASZ
Model	SAMBA 280
Category	Farm Equipment
Language	English