10. WARRANTY CARD
LIGHT CLASS REAR DISC MOWER
The product quality has been checked and meets the required standards and regulations and is
permitted for use.
NOTE: A warranty card without the required information or with corrected or illegible
information – is invalid.
11. WARRANTY TERMS
11.1. Warranty claim procedures
1. The manufacturer guarantees its products against faults in materials or production.
2. Warranty period is for two years from the date of sale to the purchaser, stated above.
3. Any repair which is subject to warranty should be carried out by an authorized SaMASZ dealer. Upon
completion of the repair, the dealer must submit a warranty claim within 14 days.
4. Warranty claims regarding replacing of the product are considered if received within 14 days after
it is completed by the manufacturer.
5. The following parts and situations are not covered by warranty:
a) wearing parts: discs, slides, gears and parts within, bushings and sliding bushes, joints, knife
holders, cutting knives, knife mountings, v-belts, bearings, canvas covers, tires, fastening
elements, etc. These repairs may be carried out only at the purchaser cost.
b) use for any other purpose than those described in the operator’s manual,
c) operation on stony fields and results such as: damage of tine conditioner's shaft, discs,
bending of cutter bar (stone with its diameter of 5.5" will not move between the discs and
conditioner's shaft,
d) running into any obstacle,
e) too fast lowering of the cutter bar to the ground,
f) transport and accidental damage.
6. The Purchaser bears the costs of technical evaluation - when the manufacturer finds that a claimed
product is free of defects and a technical report confirms that.
To Next Page
Loading...
Need help?
General
