Operator’s manual
Bale wrapper
Spin
- 5 -
3.4. Standard equipment and spare parts
The user may purchase the following optional and additional equipment a tan authorized
reseller or directly from the manufacturer:
Spare parts catalogue,
Bale vertical positioning system,
Integrated lights required for travelling on public roads,
Warning triangles for slow-running vehicles,
Locking pin release handle,
Paint touch-up kit.
4. SAFETY PRECAUTIONS
The following precautions are for your safety. They must be read carefully
and followed by every person who operates or maintains the machine. Failure to follow these
safety precautions could result in serious injury or death to the operator, maintenance person or
bystanders and property damage to the machine and surrounding property.
Safety Signal Words
This manual and the safety labels attached to this equipment utilize signal words that signify
safety hazards with different levels of severity. Below are the words used and the definitions
for these words:
• DANGER indicates a hazardous situation which, if not avoided, will result in death
or serious injury
• WARNING indicates a hazardous situation which, if not avoided, could result in
death or serious injury
• CAUTION indicates a hazardous situation which, if not avoided, could result in
minor or moderate injury
• NOTICE is used to address practices not related to physical injury
The following descriptions are for your safety: They must therefore be read
carefully and applied every time you use the machine.
The machine has been designed for use by one single operator.
When using, servicing, repairing, moving or storing the machine, the operator must wear safety
footwear, safety gloves plus ear protection and dusk mask if necessary.
During use, the machine may give rise to dust, especially if the soil is dry. You are advised to
use a tractor with a cab fitted with filters in the ventilation system. Failing this, wear a dust
mask with filter to protect your respiratory tract.
Front axis of the tractor should be weighted to keep the balance. If need be, use front wheel
weights.
In order to keep steering conditions, impact on front axis should be at least 20% of the complete
tractor.
Be extremely careful whenever using hydraulic lift lever or buttons. Any operation with
hydraulic lift lever should be done from operator’s seat; DO NOT move the lever from outside
of a tractor.
In case of tractors equipped with EHR, operating with hydraulic lift is done by the buttons
mounted outside the tractor’s cabin. When operating be extremely careful.
When attaching the mower to a tractor, the operator should wear protective gloves.
To Next Page
Loading...
