28
TRANSPOSE SET
In this page, you can select which sections of the instrument you would like to transpose.
Press [FUNCTION] button to select “Tras.Set?”. Press [ENTER] button to select and use [+/-]
buttons to select “ALL“ or “Panel“ or “Song”.
ALL The all instrument will be transposed including the USB Song (this is the default
mode).
Panel The all instrument will be transposed but not the USB song.
Song Only the USB song will be transposed.
MANAGING THE USB DISK
When inserting the USB disk in its slot you will notice that the display will immediately indicate
the first available Midi File Song stored in the memory.
It is possible to load different type of styles in the USB disk:
1 Standard Midi File songs
2 Style files
3 Setting - Panel Memory Registrations
The display will only show the files related to each of the listed groups when selected.
To select one of the groups follow the indications below:
- Press and hold the [USB FILES] button
- Using the [+/-] buttons select one of the 3 available options. It is also possible to select the
desired option by pressing the buttons [1] or [2] or [3].
When the desired option is selected the display will show only the USB files related to the type of
file selected until the instrument is switched off.
At power up, the instrument will automatically restore the SMF song option.
SAVING THE REGISTRATION DATA TO USB DISK
It is possible to SAVE the Panel Memories registrations in the USB disk and save them in different
banks. See in this manual on previous pages.
LOADING THE REGISTRATION DATA FROM USB
It is possible to LOAD the Panel Memories registrations from the USB disk and save them in
different banks. See in this manual on previous pages.
DELETE REGISTRATION FILES FROM USB
It is possible to DELETE the Panel Memories registrations in the USB.
See in this manual on previous pages.
To Next Page
Loading...