SAMIX ES500 - Initial operation; Site selection

SAMIX
®
ES500
18
5 Initial operation
CAUTION
Risk of crushing when lifting and transporting the SAMIX
®
ES500.
It is recommended to call on the assistance of a second person when lifting and transporting
the SAMIX
®
ES500.
5.1 Site selection
Choose a suitable location for the SAMIX
®
ES500. Observe the following information:
• Position the SAMIX
®
ES500 on steady, even ground.
• Ensure that there is enough space for the operation of the SAMIX
®
ES500. The
power switch and mains connector must be easily accessible.
• SAMIX
®
devices satisfy the safety standards for laboratory equipment. Choose a
location for the device which prevents handling by unauthorized people.
• Ensure good ventilation in the area of the SAMIX
®
ES500.
• Choose a location away from the direct air ow of air conditioning systems, hea-
ters, open windows or fans.
• Protect the SAMIX
®
ES500 against direct sunlight, extreme humidity (max. 80%)
and high temperature uctuations. An ambient temperature between +15 °C and
+30 °C is recommended.
• Keep the SAMIX
®
ES500 clean, dry and dust-free.
NOTICE
When checking for suitable erection conditions, please also observe the information in the
enclosed document "Installation Qualication (IQ)".