EasyManua.ls Logo

SAMIX ES500 - Basic comments; General specifications; Intended use; Foreseeable misuse

SAMIX ES500
50 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
SAMIX GmbH
Basic comments
1 Basic comments
1.1 General specications
The SAMIX
®
ES500 is manufactured by SAMIX GmbH, and its safety has been che-
cked by the TÜV Rhineland.
For safe operation, and to avoid personal injuries and material damage,
the instruction manual must be read carefully and understood,
the instruction manual must always be available at the mixer and observed.
The current instruction manual describes the structure, operating principle and hand-
ling of the SAMIX
®
ES500 mixer.
1.2 Intended use
The SAMIX
®
ES500 mixer is solely intended for the manufacture of pharmaceutical
and cosmetic products.
1.3 Foreseeable misuse
The following usage is considered foreseeable misuse:
use of excessively large jars (nominal volume: 1000 ml)
operation of mixing blades without jar
implementing the mixing process in MANUAL operating mode, whereby the shaft of
the mixing blade is not properly engaged in the bayonet mount of the device
no coaxial guidance of the jar to the device
1.4 Limits of operating range
SAMIX
®
devices are designed for operation in a normal room atmosphere. An ambi-
ent temperature of 15 - 30 °C and relative air humidity below 80% are recommended.