35
SAMIX GmbH
Operation
Fig. 22: Close the jar lid tightly and select a high speed using the "+" button
CAUTION
Risk of injury from unsteady holding of mixing unit during the free spin motion!
Firmly hold the mixing unit with at least one hand during the free spin motion.
ATTENTION
Risk of material damage!
In order to avoid a destruction of the hollow shaft, the SAMIX
®
mixing blade shaft must be
inserted fully in the device. The bayonet noses can no longer be visible, only the gold-colored
coating.
NOTICE
If the display shows "FSLA", the free spin motion can be started by pressing the "Start/Stop"
button.
To Next Page
Loading...