EB 2520 EN 7
Safety instructions and measures
Referenced documentation
The following documents apply in addition to these mounting and operating instructions:
− Mounting and operating instructions for
e.g. Type2N or 2NI Strainer uEB1015
− Data sheets for
e.g. Type2N or 2NI Strainer uT1015
− Mounting and operating instructions as well as data sheets for additional components
(e.g. shut-off valves, pressure gauges etc.).
1.1 Notes on possible severe personal injury
DANGER
!
Risk of bursting in pressure equipment.
Valvesandpipelinesarepressureequipment.Improperopeningcanleadtovalve
components bursting.
Î Observe the maximum permissible pressure for valve and plant.
Î Beforestartinganyworkonthevalve,depressurizeallplantsectionsaffectedas
well as the valve.
Î To prevent uncontrolled excess pressure, make sure that suitable overpressure pro-
tection is installed on site in the plant section.
Î Drain the process medium from all the plant sections affected as well as the valve.
Î Wear personal protective equipment.