Need help?Do you have a question about the Samson 2417 Series and is the answer not in the manual?
General| Brand | Samson |
|---|---|
| Model | 2417 Series |
| Category | Control Unit |
| Language | English |
Details on the device's intended use and the required qualifications for operating personnel.
Guidance on PPE and the responsibilities of operators and personnel.
Information on applicable standards and related documentation.
Critical safety information regarding severe personal injury risks.
Safety information concerning potential personal injuries from operation.
Warnings and precautions to prevent damage to the regulator or property.
Explanation of the information present on the regulator's nameplate.
Location of nameplates and identification of material numbers for valve and actuator.
Key technical parameters, operating limits, and compliance information for the regulator.
Visual representation of the regulator's dimensions with labels.
Procedures for checking the shipment and unpacking the regulator components.
Instructions for safe transport, lifting, and handling of the regulator.
Steps to prepare the pipeline and check the valve before installation.
Checking installation site conditions and determining the correct mounting position.
Guidelines for inlet and outlet pipe lengths to ensure proper regulator function.
Installation details for control lines, compensation chambers, and needle valves.
Installation of strainers, bypass valves, insulation, and pressure gauges.
Steps for installing the regulator and flushing the pipeline before start-up.
Procedures for pressure testing and initiating plant operation.
Detailed instructions on how to adjust the regulator's set point.
Overview of maintenance needs, safety precautions, and operational checks.
Procedures for replacing the actuator and set point springs.
Guides for replacing seat, plug, and operating diaphragm components.
Specific torque values and approved lubricants for assembly procedures.
Information on how to order replacement parts, lubricants, and tools.
A guide to identifying and resolving common malfunctions and their causes.
Steps for safely taking the regulator out of service for repair or disassembly.
Instructions for the proper disposal of the regulator and its components.
Contact information for after-sales support and a list of spare parts.
Information regarding conformity certificates and EU declarations.
To Next Page
