Samson 2417 Series - Malfunctions; Ordering Spare Parts and Operating Supplies

44 EB 2517 EN
Malfunctions
7.9 Ordering spare parts and
operating supplies
Contact your nearest SAMSON subsidiary
or the SAMSON After-sales Service depart-
ment for information on spare parts, lubri-
cants and tools.
Spare parts
Seesection10.2fordetailsonspareparts.
Lubricants
Contact the SAMSON's After-sales Service
department for more information on suitable
lubricants.
Tools
Contact the SAMSON's After-sales Service
department for more information on suitable
tools.
8 Malfunctions
ThemalfunctionslistedinTable9arecaused
by mechanical faults and incorrect regulator
sizing.Inthesimplestcase,thefunctioning
can be restored following the recommended
action. Special tools may be required for re-
pair work.
Exceptionaloperatingandinstallationcondi-
tions may lead to changed situations that
may affect the control response and lead to
malfunctions. For troubleshooting, the condi-
tions, such as installation, process medium,
temperature and pressure conditions, must
be taken into account.
SAMSON's After-sales Service department
can help during troubleshooting. Further in-
formationisavailableinsection10.1.
We recommend removing the regulator from
the pipeline before repairing it.
SAMSON's After-sales Service department
can support you in drawing up an inspection
and test plan for your plant.
Contact SAMSON's After-sales Service
department for malfunctions not listed in the
table.
Tip
Note