Samson 2417 Series User Manual

EB 2517 EN 7
Safety instructions and measures
Responsibilities of operating personnel
Operating personnel must read and understand these mounting and operating instructions as
wellasthereferenceddocumentsandobservethespeciedhazardstatements,warnings
and caution notes. Furthermore, the operating personnel must be familiar with the applicable
health, safety and accident prevention regulations and comply with them.
Referenced standards and regulations
The regulators comply with the requirements of the European Pressure Equipment Directive
2014/68/EU. Regulators with a CE marking have an EU declaration of conformity, which
includes information about the applied conformity assessment procedure. This EU declaration
ofconformityisincludedintheAppendixoftheseinstructions(seesection10.3).
AccordingtotheignitionriskassessmentperformedinaccordancewithEN13463-1:2009,
section 5.2, the non-electrical regulators do not have their own potential ignition source even
in the rare incident of an operating fault. As a result, they do not fall within the scope of Di-
rective 2014/34/EU.
Î Forconnectiontotheequipotentialbondingsystem,observetherequirementsspeciedin
section6.4ofEN60079-14(VDE0165Part1).
Referenced documentation
The following documents apply in addition to these mounting and operating instructions:
– Mounting and operating instructions for accessories, e.g.
Compensation chamber for Type41-73 Regulators uEB2595
– Data sheet for accessories, e.g.
Accessories
Compensation chamber·Screw ttings·Control line
connection·Control line
uT2595

Samson 2417 Series Specifications

General

Brand	Samson
Model	2417 Series
Category	Control Unit
Language	English