Samson 2413 Series User Manual

38 EB 2517 EN
Servicing
Risk of burn injuries due to hot or cold com-
ponents and pipeline.
Regulator components and the pipeline may
become very hot or cold. Risk of burn inju-
ries.
− Allow components and pipelines to cool
down or heat up.
− Wear protective clothing and safety gloves.
Risk of regulator damage due to incorrect
servicing or repair.
Service and repair work must be performed
by trained staff only.
Risk of regulator damage due to excessively
high or low tightening torques.
Observe the specied torques on tightening
regulator components. Excessively tightened
torques lead to parts wearing out quicker.
Parts that are too loose may cause leakage.
Observe the specied tightening torques.
Risk of regulator damage due to the use of
unsuitable tools.
Only use tools approved by SAMSON.
WARNING
!
NOTICE
!
NOTICE
!
NOTICE
!
Risk of regulator damage due to the use of
unsuitable lubricants.
Only use lubricants approved by SAMSON.
SAMSON's After-sales Service department
can support you concerning lubricant,
tightening torques and tools approved by
SAMSON.
The regulator was checked by SAMSON
before it left the factory.
− Certain test results (seat leakage and leak
test) certied by SAMSON lose their validi-
ty when the regulator is opened.
− The product warranty becomes void if
service or repair work not described in
these instructions is performed without
prior agreement by SAMSON's After-sales
Service department.
− Only use original spare parts by
SAMSON, which comply with the original
specications.
SAMSON's After-sales Service department
can support you in drawing up an inspection
and test plan for your plant.
NOTICE
!
Note
Note
Tip

Samson 2413 Series Specifications

General

Brand	Samson
Model	2413 Series
Category	Control Unit
Language	English