Samson 3241 - 2.2 Actuator Nameplate; 2.3 Material Numbers

2-2 EB 8015 EN
Markings on the device
Item Inscription meaning
15 Noise reduction:
1:ow divider(ST)1 · 2:ST2 ·
3:ST3 · 1/PSA:ST1 standard and inte-
grated in seat for PSA valve ·
AC-1/AC-2/AC-3/AC-5: anti-cavitation
trim, versions1 to5
LK: perforated plug · LK1/LK2/LK3:perfo-
rated plug with ow divider ST1 to ST3 ·
MHC1:multi-hole cage ·
CC1:Combi Cage · ZT1:Zero Travel ·
LDB:LowdB
16 PSA version:
PSA
17 Cage/seat style:
CS:clamped-in seat · CG:guided cage ·
SS:screwed-in seat · SF:suspended cage,
anged seat
18 Country of origin
19 ID of the notied body (EU), for example:
− 0062 for Bureau Veritas Services SAS,
8Cours du Triangle, 92800 PUTEAUX –
LA DEFENSE
21 PED: Pressure Equipment Directive
G1/G2: gases and vapors
Fluid group1= hazardous
Fluid group2= other
L1/L2: liquids
Fluid group1= hazardous
Fluid group2= other
I/II/III: Category 1 to 3
22 Serial number
23 Hardware version (NE53)
We recommend to include the device's serial
number (22 on the nameplate) and/or its
material number (as specied in the order
conrmation) in the plant documentation for
the associated tag number.
The serial number enables you to view the
device's current technical data as congured
by SAMSON. The material number enables
you to view the device's technical data as
congured by SAMSON upon delivery of
the device. To view these data, go to our
website at uwww.samsongroup.com >
Products > Electronic nameplate.
For example, you can also use the associat-
ed information to order a new nameplate
from our After-sales Service, if required.
2.2 Actuator nameplate
See associated actuator documentation.
2.3 Material numbers
The seat and plug of the valves have an item
number written on them. You can contact us
stating this item number to nd out which
material is used. Additionally, a seat code is
used to identify the trim material. This seat
code is specied on the nameplate.
Tip