Samson 3251-E - Actuator Nameplate; Material Identification Number; Label When an Adjustable Packing Is Installed; Optional RFID Tag

2-2 EB 8052-E EN
Markings on the device
The nameplate (80) is afxed to the yoke of
the valve (see Fig.2-2).
80
Fig.2-2: Valve nameplate
2.2 Actuator nameplate
See associated actuator documentation.
2.3 Material identication
number
The seat and plug of the valves have an item
number written on them. You can contact us
stating this item number to nd out which
material is used. Additionally, a seat code is
used to identify the trim material. This seat
code is specied on the nameplate.
2.4 Label when an adjustable
packing is installed
An instructional label is afxed to the valve
when an adjustable packing is installed (see
Fig.2-3).
Fig.2-3: Label when an adjustable packing is
installed
2.5 Optional RFID tag
The RFID tag is located directly next to the
nameplate on valves ordered with the RFID
tag option. It contains the same data as in-
cluded in the Data Matrix code on the elec-
tronic nameplate. It can be read using a
smartphone, tablet or RFID reader.
Application range according to the technical
data (see the ‘Design and principle of opera-
tion’ section).